Tell us about your product, market, and timeline — our specialists will design a testing programme that fits.
Our scientific team will help you identify the right tests, methods, and accreditations for your product or sample.
The Arbro Analytical Division Delhi Cosmetics Testing Laboratory at Kirti Nagar provides NABL-accredited cosmetics testing under ISO/IEC 17025:2017 (Certificate TC-7375) for cosmetic brands, soap manufacturers, personal care companies, and herbal cosmetics across the Delhi NCR cluster. The lab holds BIS recognition for IS 4011 mandatory compliance, AYUSH licence for herbal cosmetics, and MD-40 Medical Device registration, supported by USFDA-inspected and WHO Prequalified analytical capability.
NABL Certificate: NABL TC-7375
Validity: Valid until November 2027
Phone: +91 74281 16100
Email: [email protected]
Six cosmetics testing categories confirmed in the Delhi NABL cosmetics scope under TC-7375, BIS, and AYUSH licences.
pH, viscosity, specific gravity, refractive index, density, total fatty matter, and routine formulation parameters for soaps and cosmetics.
Lead, arsenic, mercury, and chromium by ICP-MS / ICP-OES against BIS IS 4707, FDA, and EU cosmetic safety limits.
Real-time and accelerated stability studies under ICH-aligned conditions for cosmetic formulations and personal care products.
PET per ISO 11930 to verify the cosmetic preservative system inhibits microbial growth throughout the declared shelf life.
Total plate count, yeast and mould, pathogen detection (Pseudomonas, Staphylococcus, E. coli, Candida), and challenge testing per ISO 17516.
BIS IS 4011 compliance testing for the mandatory BIS standard mark on cosmetic products covered under the Indian Standards framework.
Scope note: SPF in-vivo claim substantiation per ISO 24444 is conducted at the Manesar Clinical Research Division only, not at this Delhi analytical lab. For SPF claim studies on sunscreens, route clients to the Gurugram (Manesar) facility.
The most-requested analytical parameters for cosmetic and soap testing at the Delhi lab.
pH measurement and viscosity determination for cosmetic finished products and raw materials.
Aerobic mesophilic bacterial enumeration for cosmetic finished products and raw materials per ISO 21149 and pharmacopoeial methods.
Total yeast and mould count for cosmetic products and raw materials per ISO 16212 and pharmacopoeial methods.
Lead, arsenic, mercury, and chromium quantitation by ICP-MS / ICP-OES against BIS IS 4707 and international cosmetic safety limits.
Challenge testing per ISO 11930 to verify the cosmetic preservative system inhibits microbial growth across shelf life.
Real-time and accelerated stability studies under controlled temperature and humidity per ICH-aligned protocols.
Six reasons cosmetics, soap, and personal care brands across the Delhi NCR cluster choose the Delhi lab.
BIS accreditation for mandatory IS 4011 compliance testing on cosmetic products. Reports accepted for the BIS standard mark application and renewal.
Largest cosmetics testing scope across the Auriga lab network with the broadest NABL scope under TC-7375.
AYUSH licence covering herbal cosmetics, Ayurvedic personal care products, and traditional formulations needing heavy metals, microbial, and identity testing.
Centrally located in the Delhi NCR cosmetics and personal care manufacturing cluster, with local sample logistics and rapid receipt windows.
US FDA-inspected analytical capability supporting international buyer due diligence and overseas regulatory submissions.
Cosmetics testing co-located with food, pharma, water, AYUSH, and medical device scope under one quality system, reducing vendor footprint.
Four steps from initial enquiry to digital report. Standard TAT 5 to 7 working days. Express testing available.
Call your single point of contact at +91 74281 16100 to confirm the test scope, applicable standard (BIS IS 4011, ISO 17516, ISO 11930), and sample submission details.
Drop the sample at the Kirti Nagar address or send by pre-approved courier. Each sample is bar coded on receipt and registered in YLIMS.
Testing is conducted under NABL-accredited conditions (TC-7375) with in-process QA checks against the applicable cosmetic standard.
The digital report is issued and accessible via YLIMS. Standard TAT 5 to 7 working days. Express testing available for time-critical batches.
Six credentials held at the Delhi facility supporting cosmetics testing.
ISO/IEC 17025:2017, Valid Nov 2027
Bureau of Indian Standards recognised for IS 4011
AYUSH licence for herbal cosmetic testing scope
CDSCO Medical Device registration
US FDA-inspected testing facility
WHO Prequalification recognition
See the full national cosmetics testing scope, the BIS certification service, or return to the Delhi lab hub.
National cosmetics testing service page with the complete catalogue of methods, parameters, and supported standards.
Go to national service page →Dedicated BIS standards testing service page covering IS 4011 and the mandatory BIS standard mark for cosmetics.
BIS standards testing →Delhi flagship lab overview covering pharma, food, water, cosmetics, AYUSH, environmental, and medical device scope.
Back to Delhi lab hub →NABL TC-7375 accredited cosmetics testing with BIS IS 4011, AYUSH herbal cosmetics, and MD-40 Medical Device credentials. Standard TAT 5 to 7 working days. Express options available.
Download a practical testing guide tailored to your industry — checklists, parameters, and regulatory tips in one place.
Download Guide Request a Quote InsteadNo thanks, I'll keep browsing